Technical data

Material Designations

P1	Free-cutting steel and structural steel	<500 N/mm²	St44-2 ~ C255 (1.0144 ~ 1.1158)
P2	Carbon steel and low-alloy steel	500 – 700 N/mm²	C30 ~ C45 (1.0528 ~ 1.0503)
P3	Medium-alloy steel and heat-treated steel	600 – 800 N/mm²	42Cr4 ~ 25CrMo-4 (1.0745 ~ 1.7218)
P4	High-alloy steel	800 – 1000 N/mm²	C105W2 (1.1645)
P5	Tool steel	900 – 1200 N/mm²	X 40 CrMoV 5 1 (1.2344)
P6	High-tensile-strength steel	1200 – 1600 N/mm²	X3 NiCrMo 18 8 5 (1.2706)
M1	Ferritic stainless steel	400 – 700 N/mm²	AISI303 X 10 CrNiS 18 9 (1.4305)
M2	Austenitic stainless steel – good machinability	500 – 750 N/mm²	AISI304 X5 CrNi 18 (1.4350)
M3	Austenitic stainless steel – medium machinability	550 – 850 N/mm²	AISI316 X5 CrNiMo 17 12 2 (1.4401)
M4	Martensitic stainless steel	650 – 950 N/mm²	F 55-329 S SUPER DUPLEX (1.4501)
M5	PH stainless steel	800 – 1250 N/mm²	17-4 PH X 5 CrNiNb 16 4 (1.4542)
K1	Gray cast iron	150 – 250 HB	GG-25 (0.6025)
K2	Ductile cast iron	150 – 350 HB	GGG-40 (0.7040)
K3	Austenitic cast iron	120 – 260 HB	GGG-Ni 35 (0.7683)
K4	ADI cast iron	250 – 500 HB	GJS-1000-5 ADI 1000
N1	Aluminum alloys	< 12% Si	AISI6082 AlMgSi 1 (3.2311)
N2	Aluminum alloys	> 12% Si	G-AlSi12 (3.2581)
N3	Copper alloys		CuZn
N4	Brass alloys and bronze alloys		CuZnPb
S1	Super stopy żaroodporne – (HRSA) – dobra obrabialność	<25 HRC	A286
S2	Super stopy żaroodporne – (HRSA) – średnia obrabialność	25-35 HRC	Inconel 718
S3	Super stopy żaroodporne – (HRSA) – niska obrabialność	35-45 HRC	Inconel 718 (kuty)
S4	Low-alloy titanium – good machinability		TiAl2Sn4Zr6Mo
S5	High-alloy titanium – medium machinability		TiAl6V4
H1	Hardened steel (general)	50-56 HRC	X120 Mn 12 (1.3401)
H2	Hardened bearing steel	54-62 HRC	100 Cr 6 (1.3505)
H3	Hardened tool steel	60-65 HRC	X 40 CrMoV 5 1 (1.2344)
H4	Hardened, martensitic stainless steel	50-56 HRC	X 65 CrMo 14 (1.4109)
H5	Hardened white cast iron	48-55 HRC	G-X330 NiCr 4 2